Overview
Bodicote is inside NDTScan's home territory. Working from Oxford, Neil Smuts covers Oxfordshire, Buckinghamshire, Berkshire and Oxfordshire as a single patch, and Bodicote projects are scanned and interpreted by the same named specialist. There is no subcontracted operator and no anonymous report.
Bodicote has its own character for this work: Cherwell District Council's Bodicote House and the Longford Park development. Wherever the work sits in Cherwell, the question NDTScan is answering is what the concrete actually contains, and how much of it can be trusted.
The on-site capture is only the first step. NDTScan's value is in the post-processing: analysing reflections, cross-checking traces against each other, resolving ambiguous returns and producing a fully interpreted result. In Bodicote, as everywhere else, the data is worked up in the office before a single conclusion is drawn, and the report says plainly what was found, what was not found and how confident the reading is.
One caveat applies to every Bodicote project. No structural repair to a concrete element should be specified or carried out until the structure has been properly scanned and the data expertly interpreted. Repairing what has not been correctly understood risks repeating the fault, and the scan is the cheapest part of getting it right.
Scan before you repair. That is the standing advice for every Bodicote client, and the reason NDTScan reports what the concrete contains before anyone specifies what to do about it.
Services Available in Bodicote
- GPR Concrete Scanning Pre-drill and pre-coring surveys, rebar and mesh mapping, post-tensioned tendon detection, void and honeycombing detection, slab thickness and cover estimation and RAAC identification. Method and antenna selected for the Bodicote element in question, with the full interpreted record supplied.
- Ultrasonic Testing of Concrete Ultrasonic pulse velocity testing for uniformity and quality assessment, pulse echo for thickness and delamination where only one face is accessible, and the combined SONREB method for compressive strength estimation. Used across Oxfordshire where GPR alone cannot answer the question.
- Concrete Compressive Strength Assessment Rebound hammer surveys, UPV combined method and managed core extraction with laboratory testing to BS EN 13791. Independent reporting suitable for engineering acceptance, building control and dispute work on Bodicote structures.
Typical Bodicote Projects
Around Bodicote the instructions NDTScan receives are shaped by post-war housing where non-standard construction has to be identified before any works and redevelopment sites where existing slabs and frames must be understood before design work starts. Alongside those sit the constants of every Oxfordshire town: pre-drill and pre-coring scans on occupied buildings, post-tensioned slab investigation before any fixing or penetration, RAAC identification in schools and public buildings, and structural investigation before repair.
NDTScan also covers Banbury, Adderbury and Bloxham and the rest of Cherwell. Every one of these areas is reached from the Oxford base without a subcontractor in the chain.
About NDTScan
NDTScan is a specialist non-destructive testing company based in Oxford and led by Neil Smuts. Its core disciplines are GPR concrete scanning, ultrasonic testing and in-situ compressive strength assessment, brought together in its concrete scanning and structural condition survey service. NDTScan is a Level 4 UKCSS Operator, the first in the UK to achieve that certification. Bodicote and the whole of Oxfordshire are within the company's everyday working area, and all work is reported to a standard suitable for engineering acceptance. RAAC identification is covered on the RAAC surveys page, and steel on the ultrasonic thickness and corrosion mapping page.
Bodicote NDT Services
- GPR Pre-Drill Scanning Pre-drill and pre-coring surveys, PT slab mapping, rebar location and void detection across Bodicote housing, commercial and public buildings.
- Post-Tensioned Slab Investigation Tendon detection and full slab documentation for Oxfordshire commercial, education and healthcare structures before any fixing, cutting or coring.
- RAAC Identification GPR based RAAC plank identification for schools, halls, housing and public buildings across Cherwell, reported in line with IStructE guidance.
- Ultrasonic Pulse Velocity Testing UPV surveys using the Proceq Pundit PL-200 to BS EN 12504. Uniformity, delamination and strength estimation for Bodicote structures.
- Compressive Strength Assessment Rebound hammer, SONREB and managed core extraction to BS EN 13791, reported for engineering acceptance and building control in Bodicote.
- Short-Notice Bodicote Coverage Oxford-based team covering Bodicote and the rest of Cherwell. Immediate mobilisation available, with every survey interpreted and reported in full.
Our Services
- Concrete & Structural Integrity
- Drone-Based Aerial Surveying
- Vehicle-Mounted Inspection
- Handheld & Portable Inspection
- Underwater Surveying & Inspection
- Digital Twin & 3D Modelling
- Advanced Data Analytics & Reporting
Sectors We Support
- Aerospace & Aviation
- Education & Public Sector
- Archaeology & Heritage
- Smart Cities & Urban Planning
- Waste & Recycling
- Defence & Security
- Emergency Response
- Construction & Real Estate
- Mining & Minerals
- Agriculture & Environment
- Maritime & Underwater
- Rail & Transportation
- Oil & Gas
- Civil Engineering
- Utilities & Energy
Equipment & Technologies
- IML
- GSSI
- Sylva
- Leica
- Voyis
- Testo
- Hilti
- Cygnus
- Proceq
- MALA GPR
- SlipAlert
- Flyability
- Protimeter
- Matterport
- Saab Seaeye
- Deep Trekker
- IDS GeoRadar
- FLIR Systems
- Sonatest Ltd
- Wagner Meters
- Mistras Group
- Munro Stanley
- Blue Robotics
- DJI Enterprise
- Teledyne Marine
- Quantum Systems
- Argus Electronic
- Fakopp Enterprise
- Eddyfi Technologies
- Olympus Corporation
- FARO
- NavVis
- Trimble
Why Choose NDTScan
Bodicote Concrete Scanning FAQs
Frequently Asked Questions.
Common questions about GPR concrete scanning, ultrasonic testing and compressive strength assessment in Bodicote and across Oxfordshire. NDTScan works from its Oxford base with fully interpreted reporting.
Is Bodicote within NDTScan's normal working area?
It is. NDTScan works from Oxford across Oxfordshire and the two neighbouring counties, and Bodicote sits comfortably inside that patch. Every survey is carried out and interpreted by Neil Smuts, so the specialist on site in Bodicote is the one who writes the report.
What will a concrete scan tell me about a Bodicote building?
What the data indicates is inside the concrete and how far each reading can be trusted. A survey indicates the position and estimated depth of reinforcement, post-tensioned tendons, embedded services and voids, and estimates slab thickness and cover. For a Bodicote building that is the difference between a decision made on evidence and one made on the drawings, and between a repair designed for the structure that exists and one designed for the structure someone assumed.
How is RAAC identified in Bodicote schools and public buildings?
With ground penetrating radar. RAAC planks return a distinctly different signature from conventional reinforced concrete, and NDTScan reads that signature element by element rather than sampling a corner and assuming the rest. The findings for a Bodicote building are reported in line with IStructE guidance, so the owner has a record that supports the decisions that follow.
What happens if a Bodicote contractor drills without scanning?
Usually nothing, until it does. Post-tensioned tendons, live services and undocumented reinforcement are routinely found where nobody expected them, and striking one turns a fixing into a structural incident. A pre-drill scan in Bodicote replaces guesswork with evidence, and NDTScan's interpreted report sets out what the data indicates, at what estimated depth, and with what confidence.
What do I receive after a concrete scan in Bodicote?
A fully interpreted report, not a photograph of marks on a slab. The data is post-processed in the office, cross-checked and written up with clear statements of what was found, what was not found and the confidence attached to each. It is written for the engineer or contractor who has to act on it in Bodicote, and it stands up to design, dispute and audit scrutiny.
Concrete scanning guides
The questions behind most enquiries
How to identify RAAC
What RAAC looks like, where it was used, and what a visual check cannot tell you.
Read the guideScanning before drilling or coring
What happens on the day, what the marks mean, and what the contractor receives.
Read the guidePost-tension detection
How tendons are investigated in a post-tensioned slab, and when the engineer decides.
Read the guideRebar scanning
Bar position, spacing and estimated cover, and what a scan cannot tell you.
Read the guideFerroscan surveys
What the Hilti system does well, and where radar takes over.
Read the guideConcrete x-ray
Why radiography is rarely practical on site, and what replaces it.
Read the guideWhat clients and partners say
In their words
I have worked with Neil on a number of projects and have found him to be extremely knowledgeable in the fields of concrete scanning and structural repair. His approach to the task is very structured and professional, and communication throughout the project is always open and honest. I will be working with Neil again in the future, and I would happily recommend him.
I had the pleasure of working with Neil on a complex project involving structural remediation, where his expertise was key to our success. Neil was professional, knowledgeable, and solution-focused throughout. He worked seamlessly with the client team and brought the right attitude to every challenge.
Neil is an expert in his field, with a high level understanding of concrete scanning techniques, concrete repairs, and the technology that suits. He shows a keen interest in innovation and is open to learning new methodologies. I would highly recommend Neil to those seeking his services.