NDT Scan Logo
Get Started
Binfield's specialist NDT team. On site the same day.

Concrete Scanning Binfield | Local Specialist | NDTScan

GPR concrete scanning, ultrasonic testing and compressive strength assessment across Binfield, Berkshire and the surrounding counties. Same-day attendance from our Oxford base.
Book a Scan
Bracknell town centre, Berkshire

Overview

Binfield is inside NDTScan's home territory. Working from Oxford, Neil Smuts covers Berkshire, Buckinghamshire, Berkshire and Oxfordshire as a single patch, and Binfield projects are scanned and interpreted by the same named specialist. There is no subcontracted operator and no anonymous report.

Binfield lies in Bracknell Forest, and what NDTScan is asked to look at here reflects Berkshire as a whole: Thames Valley commercial estates, dense Victorian and interwar housing and the heavy concrete of the 1960s and 1970s office and hospital building boom. Across Bracknell Forest the recurring need is the same: to know exactly what is inside a concrete element before anyone drills, cores, cuts or specifies a repair.

What separates a dependable concrete scan from a superficial one is the interpretation. NDTScan concentrates most of its effort after the site visit: reviewing every radargram, correlating GPR with Ferroscan and ultrasonic data where the element demands it, and writing a report that an engineer can act on. Binfield clients receive that standard of work as a matter of course.

NDTScan will always say this to a Binfield client considering repairs: scan first. A repair specified without a proper survey and an expert interpretation is a repair to a guess. The survey establishes what is really there, so the engineer can design for the structure that exists rather than the one on the drawings.

Scan before you repair. That is the standing advice for every Binfield client, and the reason NDTScan reports what the concrete contains before anyone specifies what to do about it.

Services Available in Binfield

  • GPR Concrete Scanning Pre-drill and pre-coring surveys, rebar and mesh mapping, post-tensioned tendon detection, void and honeycombing detection, slab thickness and cover measurement and RAAC identification. Method and antenna selected for the Binfield element in question, with the full interpreted record supplied.
  • Ultrasonic Testing of Concrete Ultrasonic pulse velocity testing for uniformity and quality assessment, pulse echo for thickness and delamination where only one face is accessible, and the combined SONREB method for compressive strength estimation. Used across Berkshire where GPR alone cannot answer the question.
  • Concrete Compressive Strength Assessment Rebound hammer surveys, UPV combined method and managed core extraction with laboratory testing to BS EN 13791. Independent reporting suitable for engineering acceptance, building control and dispute work on Binfield structures.

Typical Binfield Projects

The work NDTScan is instructed for around Binfield follows the shape of Bracknell Forest: pre-drill and pre-coring scans in occupied houses and commercial units, post-tensioned slab checks before fixings or penetrations, RAAC identification in schools, halls and public buildings, cover and rebar surveys ahead of structural alterations, and investigation of existing slabs and frames before repair or redesign.

NDTScan also covers Bracknell, Wokingham and Warfield and the rest of Bracknell Forest. Every one of these areas is reached from the Oxford base without a subcontractor in the chain.

About NDTScan

NDTScan is a specialist non-destructive testing company based in Oxford and led by Neil Smuts. Its core disciplines are GPR concrete scanning, ultrasonic testing and in-situ compressive strength assessment, brought together in its concrete scanning and structural condition survey service. NDTScan is a Level 4 UKCSS Operator, the first in the UK to achieve that certification. Binfield and the whole of Berkshire are within the company's everyday working area, and all work is reported to a standard suitable for engineering acceptance.

Binfield NDT Services

  • GPR Pre-Drill Scanning Pre-drill and pre-coring surveys, PT slab mapping, rebar location and void detection across Binfield housing, commercial and public buildings.
  • Post-Tensioned Slab Investigation Tendon detection and full slab documentation for Berkshire commercial, education and healthcare structures before any fixing, cutting or coring.
  • RAAC Identification GPR based RAAC plank identification for schools, halls, housing and public buildings across Bracknell Forest, reported in line with IStructE guidance.
  • Ultrasonic Pulse Velocity Testing UPV surveys using the Proceq Pundit PL-200 to BS EN 12504. Uniformity, delamination and strength estimation for Binfield structures.
  • Compressive Strength Assessment Rebound hammer, SONREB and managed core extraction to BS EN 13791, reported for engineering acceptance and building control in Binfield.
  • Same-Day Binfield Coverage Oxford-based team covering Binfield and the rest of Bracknell Forest. Immediate mobilisation available, with every survey interpreted and reported in full.
Sales Support?

02080
888 724

Technical Support?

info@ ndtscan.com

Yes. GPR concrete scanning is NDTScan's core service and Binfield, Berkshire is inside its everyday working area. Neil Smuts plans the survey, captures the data on site and interprets it himself, so there is one accountable specialist from instruction to report.
Ground penetrating radar locates reinforcing bars and mesh, post-tensioned tendons, conduits and services, voids and honeycombing, and measures slab thickness and cover. In Binfield that most often means proving a slab or wall is safe to drill or core, mapping reinforcement before an alteration, or characterising a structure before repair. Where GPR cannot resolve a question, NDTScan adds Ferroscan or ultrasonic methods.
Yes, regularly. RAAC identification surveys are a standing part of NDTScan's Berkshire work, in schools, halls, housing and healthcare buildings. GPR is used to separate RAAC planks from conventional reinforced concrete, and the findings are reported in line with IStructE guidance so the building owner can act on them.
Because the drawings are not the structure. Post-tensioned tendons, live services and undocumented reinforcement are all commonly found where nobody expected them, and striking any of them is expensive at best. On repairs the argument is stronger still: a repair specified without a proper survey and interpretation is a repair to a guess. NDTScan's rule for Binfield and everywhere else is scan first, interpret properly, then design.
The interpreted result, not raw traces. Scaled plans of the reinforcement, tendons, services and voids located, slab thickness and cover where measured, clear statements of what was and was not found, and the confidence attached to each finding. NDTScan works the Binfield data up in the office before a single conclusion is drawn, and the report says so plainly.
Need reliable NDT support? NDTScan delivers advanced non-destructive testing and structural diagnostics across the UK. Explore our full capabilities below:

Our Services

Sectors We Support

Equipment & Technologies

Our NDT Process - Simplified

How NDTScan Delivers Clarity, Confidence, and Compliance

Initial Scope Consultation

We start by understanding your asset, its environment, and your inspection goals. Whether it's structural integrity, corrosion mapping or defect detection, our team tailors a solution that fits.

Advanced NDT Scanning

Using industry-leading equipment, including Trimble, Leica, DJI drones, and GPR systems, we perform detailed non-intrusive testing with minimal disruption.

Data Reporting & Analysis

You receive comprehensive, plain-English reports backed by high-resolution imagery, 3D models, and annotated scan maps. Data is delivered fast, often within the same week.

Recommendations & Support

Beyond inspection, we guide your next steps, from remedial works to structural interventions or re-inspections. We’re partners, not just service providers.

Precision Scanning. Proven Results. Trusted Nationwide.

Our performance protects your assets. Our technology leads the way. Our insight helps you decide.

We deliver specialist non-destructive testing (NDT) that helps you avoid risk, cut cost, and gain absolute clarity, across infrastructure, utilities, construction, marine and more.

Discover our process
Why Choose NDTScan

Changing the way industries think about inspection and assurance.

Proven, Compliant Technology

Our scanning systems are smart, secure, and fully compliant with UKAS, ISO 9712, and sector safety protocols. We bring the right tech to every job, no compromise.

Highly Skilled Team

Every NDTScan technician is certified, trained, and experienced in real-world environments, from rail tunnels to marine piles. You're in expert hands.

Certified, Auditable Results

We deliver UKAS-traceable reporting and standards-led inspection workflows, ideal for clients under CDM, Utilities, and Infrastructure compliance frameworks.

Support When You Need It

From urgent site visits to post-scan guidance, our team is on hand to support you, because clarity shouldn't wait until Monday.

Binfield Concrete Scanning FAQs

Frequently Asked Questions.

The questions Binfield clients ask most often about concrete scanning, RAAC identification and structural investigation, answered by the specialist who does the work.
Yes. GPR concrete scanning is NDTScan's core service and Binfield, Berkshire is inside its everyday working area. Neil Smuts plans the survey, captures the data on site and interprets it himself, so there is one accountable specialist from instruction to report.
Ground penetrating radar locates reinforcing bars and mesh, post-tensioned tendons, conduits and services, voids and honeycombing, and measures slab thickness and cover. In Binfield that most often means proving a slab or wall is safe to drill or core, mapping reinforcement before an alteration, or characterising a structure before repair. Where GPR cannot resolve a question, NDTScan adds Ferroscan or ultrasonic methods.
Yes, regularly. RAAC identification surveys are a standing part of NDTScan's Berkshire work, in schools, halls, housing and healthcare buildings. GPR is used to separate RAAC planks from conventional reinforced concrete, and the findings are reported in line with IStructE guidance so the building owner can act on them.
Because the drawings are not the structure. Post-tensioned tendons, live services and undocumented reinforcement are all commonly found where nobody expected them, and striking any of them is expensive at best. On repairs the argument is stronger still: a repair specified without a proper survey and interpretation is a repair to a guess. NDTScan's rule for Binfield and everywhere else is scan first, interpret properly, then design.
The interpreted result, not raw traces. Scaled plans of the reinforcement, tendons, services and voids located, slab thickness and cover where measured, clear statements of what was and was not found, and the confidence attached to each finding. NDTScan works the Binfield data up in the office before a single conclusion is drawn, and the report says so plainly.