RAAC surveys in Clitheroe. The UK's reference point for RAAC.

RAAC Surveys Clitheroe | Identification and Assessment | NDTScan

RAAC identification, condition assessment and reporting to IStructE guidance across Clitheroe, Lancashire and the surrounding area. NDTScan attends from its Oxford base, anywhere in the UK.
Cracked RAAC roof planks photographed during an NDTScan survey

Overview

RAAC surveys in Clitheroe are carried out by NDTScan, the UK's specialist in the identification and analysis of reinforced autoclaved aerated concrete. The planks were installed in Lancashire buildings for nearly forty years, mainly in flat and shallow-pitched roofs, and they are now well beyond the design life their manufacturers assumed. Identifying them is the first step; understanding their condition is the one that matters.

The Department for Education's list of education settings with confirmed RAAC, published in February 2024, includes 3 settings in Lancashire, among them Haslingden St James Church of England Primary School, Knuzden St Oswald's Church of England Primary Academy and Our Lady's Catholic High School. The Department of Health and Social Care's list of hospital sites with confirmed RAAC includes Royal Blackburn Hospital and Blackpool Victoria Hospital in Lancashire. Preston Guild Hall has also been publicly reported as containing RAAC. NDTScan names these buildings to show that RAAC is a live issue in Lancashire, not to suggest it has worked on them. The published lists cover education and NHS estates only. The same planks sit in council offices, housing, leisure centres, theatres, shops, depots and private commercial stock around Clitheroe that no national list has ever counted.

A RAAC survey from NDTScan starts with identification. Ground penetrating radar separates aerated planks from dense concrete, hollowcore and timber decks plank by plank, and the reinforcement pattern, transverse bars and plank widths confirm the reading without opening the roof. Condition comes next: cracking, deflection, end bearing, water staining, corrosion and previous repairs are recorded for each plank, and the findings are classified in line with IStructE guidance so the Clitheroe owner can see at once which elements need action, which need monitoring and which are sound.

The most expensive mistake in Clitheroe, as everywhere else, is to act on RAAC before it has been understood. Whole buildings have been closed on the strength of a visual inspection that could not tell RAAC from hollowcore. NDTScan's position is that identification and condition assessment come first, remediation second, and the report has to be good enough to design from.

Scan before you repair. That is the standing advice for every Clitheroe client, and the reason NDTScan reports what the concrete contains before anyone specifies what to do about it.

Services Available in Clitheroe

  • RAAC Identification Survey GPR based, plank by plank identification of reinforced autoclaved aerated concrete in roofs, floors and walls across Clitheroe. Confirms what the element is made of without opening it up, and records plank widths, reinforcement and bearing details as evidence.
  • RAAC Condition Assessment Plank level inspection of confirmed RAAC for cracking, deflection, bearing length, water ingress, corrosion and previous repairs, classified in line with IStructE guidance. Reported so a Lancashire engineer or estates team can act on it directly.
  • RAAC Management and Reinspection Monitoring regimes, reinspection intervals and management plans for RAAC that is being kept in service, plus expert input where a Clitheroe owner needs an independent second opinion on a survey or a remediation proposal.

RAAC in and around Clitheroe

Typical Clitheroe instructions: RAAC identification in schools, halls, clinics and council buildings built between 1955 and 1995; plank by plank condition assessment of confirmed RAAC roofs and floors; risk classification in line with IStructE guidance to support decisions on closure, propping or continued use; reinspection and monitoring of managed RAAC; and independent review of surveys and remediation proposals for Lancashire owners and their insurers. NDTScan covers Clitheroe from Oxford in the same way it covers the rest of England.

NDTScan also provides RAAC surveys in Blackpool, Blackburn, Preston, Burnley, Lancaster and Lytham St Anne's and the rest of Lancashire. The rest of the region is covered from the North West RAAC surveys page, and the service itself is described on the RAAC surveys page.

About NDTScan

NDTScan is a specialist non-destructive testing company based in Oxford and led by Neil Smuts, author of The RAAC Book. It is the UK's specialist in the identification and analysis of reinforced autoclaved aerated concrete, and a Level 4 UKCSS Operator, the first in the UK to achieve that certification. RAAC surveys in Clitheroe sit alongside the company's concrete scanning and structural condition survey work, and every report is written to a standard suitable for engineering acceptance, insurers and dispute work.

Clitheroe RAAC Services

02080
888 724

info@ ndtscan.com

Yes. NDTScan attends Clitheroe and the rest of Lancashire from its Oxford base, and works across the whole of the UK. RAAC identification and condition assessment is a core service, delivered by the company's own specialists and reported in line with IStructE guidance.
Yes. Ground penetrating radar reads the internal structure of the plank without any opening up, and the difference between aerated and dense concrete is clear in the data. Where the ceiling finish or roof covering hides the planks, NDTScan works from whichever face is accessible. For a Clitheroe building that means identification with no damage to the fabric.
It will give the owner's engineer the evidence needed to make that decision. NDTScan records the condition of every plank, classifies the findings in line with IStructE guidance and states plainly where immediate action is needed. The decision on occupation rests with the responsible engineer, and the report is written so that decision can be taken on evidence rather than on fear.
No. Schools and hospitals are on the published lists because government asked for them to be surveyed. The same planks went into council buildings, housing, leisure centres, theatres, shops, offices and light industrial units across Lancashire, in Clitheroe as much as anywhere. If a flat roof dates from 1955 to 1995 and its construction is unknown, it should be identified.
NDTScan's own specialists, not a subcontractor. The company is the UK's specialist in RAAC identification and analysis, and the person who reads the radar data and classifies the planks is a specialist in this material. The Clitheroe report is the interpretation, not a set of marks on a ceiling.

Our NDT Process - Simplified

How NDTScan Delivers Clarity, Confidence, and Compliance

Initial Scope Consultation

We start by understanding your asset, its environment, and your inspection goals. Whether it's structural integrity, corrosion mapping or defect detection, our team tailors a solution that fits.

Advanced NDT Scanning

Using industry-leading equipment, including Trimble, Leica, DJI drones, and GPR systems, we perform detailed non-intrusive testing with minimal disruption.

Data Reporting & Analysis

You receive comprehensive, plain-English reports backed by high-resolution imagery, 3D models, and annotated scan maps. Data is delivered fast, often within the same week.

Recommendations & Support

Beyond inspection, we guide your next steps, from remedial works to structural interventions or re-inspections. We’re partners, not just service providers.

Precision Scanning. Proven Results. Trusted Nationwide.

Our performance protects your assets. Our technology leads the way. Our insight helps you decide.

We deliver specialist non-destructive testing (NDT) that helps you avoid risk, cut cost, and gain absolute clarity, across infrastructure, utilities, construction, marine and more.

Why Choose NDTScan

Changing the way industries think about inspection and assurance.

Proven, Compliant Technology

Our scanning systems are smart, secure, and fully compliant with UKAS, ISO 9712, and sector safety protocols. We bring the right tech to every job, no compromise.

Highly Skilled Team

Every NDTScan technician is certified, trained, and experienced in real-world environments, from rail tunnels to marine piles. You're in expert hands.

Certified, Auditable Results

We deliver UKAS-traceable reporting and standards-led inspection workflows, ideal for clients under CDM, Utilities, and Infrastructure compliance frameworks.

Support When You Need It

From urgent site visits to post-scan guidance, our team is on hand to support you, because clarity shouldn't wait until Monday.

Clitheroe RAAC Survey FAQs

Frequently Asked Questions.

What Clitheroe owners, engineers and estates teams ask before instructing a RAAC survey, and how NDTScan answers.
Yes. NDTScan attends Clitheroe and the rest of Lancashire from its Oxford base, and works across the whole of the UK. RAAC identification and condition assessment is a core service, delivered by the company's own specialists and reported in line with IStructE guidance.
Yes. Ground penetrating radar reads the internal structure of the plank without any opening up, and the difference between aerated and dense concrete is clear in the data. Where the ceiling finish or roof covering hides the planks, NDTScan works from whichever face is accessible. For a Clitheroe building that means identification with no damage to the fabric.
It will give the owner's engineer the evidence needed to make that decision. NDTScan records the condition of every plank, classifies the findings in line with IStructE guidance and states plainly where immediate action is needed. The decision on occupation rests with the responsible engineer, and the report is written so that decision can be taken on evidence rather than on fear.
No. Schools and hospitals are on the published lists because government asked for them to be surveyed. The same planks went into council buildings, housing, leisure centres, theatres, shops, offices and light industrial units across Lancashire, in Clitheroe as much as anywhere. If a flat roof dates from 1955 to 1995 and its construction is unknown, it should be identified.
NDTScan's own specialists, not a subcontractor. The company is the UK's specialist in RAAC identification and analysis, and the person who reads the radar data and classifies the planks is a specialist in this material. The Clitheroe report is the interpretation, not a set of marks on a ceiling.